Sonic Catalog 2020/21

VAG - AUDI - VOLKSWAGEN

829118 - FUEL PUMP DRIVE BELT KIT - VAG TDI 2,7/3,0

829118 has been developed specifically for the VAG 2.7L and 3.0L TDI diesel engines from 2007 that are equipped with a belt driven high pressure diesel pump. The kit contains all the components to allow the removal and replacement of the pump belt while maintaining the pump and engine timing. Component equivalent to OEM tools – T40135, 3242, T10320, T40058.

PETROL

BELT PETROL

DIESEL

CHAIN DIESEL

BELT

COMPONENTS

REF ART. NO.

OEM

DESCRIPTION

1

4880364 T40135

High pressure pump locking tool

2 4880407 3242/T40237

Crankshaft tdc locking screw

3 4880365 T10320

Camshaft sprocket puller

4 4880156 T40058

Pulley bolt

VAG - AUDI - VOLKSWAGEN

829122 - VIBRATION DAMPER HOLDING TOOL - 1,8/2,0 TFSI/TSI

A comprehensive kit used for dismantling and assembling the vibration damper on the applications listed. The vibration damper fitted to the VAG 1.8 | 2.0 TFSi | TSi engines is held in place by a single central bolt. The pulley clamps the crankshaft timing chain sprocket against the end of the crankshaft, there is no traditional key way and the sprocket is not supported by the crankshaft. If the pulley bolt is removed without using the 829122 the crankshaft chain sprocket can easily separate from the crankshaft causing the timing position to be lost. The 829122 is an essential kit required to maintain the engine timing when removing the front vibration damper and should be used whenever the vibration damper is removed for instance when replacing the front crankshaft oil seal. N.B. for replacement of the camshaft drive chain additional tooling will be required – see Sonic Equipment 829066 Engine Timing Kit. The 829122 can also be used on earlier engines as the VW tool T10531 replaces the older tool T10368.

PETROL

PETROL BELT

DIESEL

DIESEL CHAIN

BELT

COMPONENTS

REF ART. NO.

OEM

DESCRIPTION

08

1

4880382 T10531/1

Vibration damper holding tool

2 4880383 T10531/3

Crankshaft sprocket holding tool adapter

3 4880384 T10531/4 & T10531/2

Crankshaft sprocket holding tool nut

VAG - AUDI - VOLKSWAGEN

829123 - CRANKSHAFT HOLDING TOOLS WRENCH - VAG

The 829123 has been designed to hold the crankshaft pulley while loosening or tightening the crank- shaft centre bolt. The tool has a short handle for easy storage with a 1/2”D square to allow use with a power bar to extend the effective handle length. Double sided tool for tightening and loosening the fixing bolts.

PETROL

CHAIN PETROL

DIESEL

BELT

DIESEL

COMPONENTS

REF ART. NO.

OEM

DESCRIPTION

1

829123 3415 & 3415/1

Crankshaft Holding Tools Wrench - VAG

VAG - AUDI - VOLKSWAGEN

829125 - CAMSHAFT ALIGNMENT KIT VAG 1,4TFSI

The 829125 timing tool kit provides the essential camshaft and crankshaft setting tools to allow replacement of the camshaft drive belt on the new (2012 onwards) VAG 1.4 TFSi petrol engines.

COMPONENTS

PETROL

CHAIN PETROL

DIESEL

BELT

DIESEL

REF ART. NO.

OEM

DESCRIPTION

1

4880386 T10504

Camshaft positioning tool - EU registered design

2 4880388 T10504/1

Camshaft timing pin

3 4880199 T10320

Locking pin (T10340)

4 4880387 T10504/2

Camshaft timing check pin

S O N I C - E Q U I P M E N T. C OM |

301