Sonic Catalog 2020/21
Timing tools
OPEL
829064 - ENGINE TIMING KIT OPEL/CHEVROLET/SAAB PETROL (A20/A24) - 2.0, 2.4
DevEloped specifically for the high power output 2.0 litre and 2.4 litre twin cam turbo charged petrol engines found across the GM, Chevrolet and Saab ranges. This kit provides all the components required to set and hold the camshafts, crankshaft and chain tensioner components when performing major engine work or replacing the cam chain and associated components.
PETROL
PETROL BELT
DIESEL
DIESEL CHAIN
BELT
COMPONENTS
REF ART. NO.
OEM
DESCRIPTION
1
4880231
EN-49212, EN-49212-1
Vauxhall - Opel - camshaft locking tool LHS (OEM ref: EN-492) Vauxhall - Opel - camshaft locking tool RHS (OEM ref: EN-492)
2 4880232 EN-49212, EN-49212-2
3 4880317 EN-48953
Camshaft adjuster holding tool
4 4880318 EN-48585
Crankshaft bolt hole balancer
5 4880320 J45027-2, EN45027-2, EN-45027,
Tension plunger holder
6 4880321
EN-45027-1, J-45027-1
Tension plunger remover
7 4880319 EN-43653, J43653
Flywheel holding tool bottom half
8 4880135 EN-43653, J43653
Flywheel holding tool
9 4880214 -
M6 x 50 caphead screw
10 4880010 -
Washers M6 form C Zc.Pl.
11 4880173 EN-955-20, KM 955-20 Tensioner location pin 4mm
12 4880172 EN-955-10, KM955
Tensioner location pin 2.5mm
13 4880215 -
M6 x 16 cap head screw self-colour to BS4168
OPEL
829065 - CAMSHAFT ALIGNEMENT KIT OPEL/SAAB PETROL TURBO (Z20/B20) - 2.0
08
The 829065 kit has been developed to change the camshaft drive chain on the twin cam chain driven 2.0lt turbo petrol engines found in the Vauxhall and Saab ranges from 2002 to 2012. 829065 is an 4 piece kit consisting of the components required to lock the camshaft, hold the crankshaft and set the chain tensioner when replacing the timing chain.
PETROL
PETROL BELT
DIESEL
DIESEL CHAIN
BELT
COMPONENTS
REF ART. NO.
OEM
DESCRIPTION
1 4880298 KM-6362-1 EN-48366-001 Camblock with inlet marking for vauxhall Z20NET engine (2.0L 2 4880299 KM-6362-2 EN-48366-002 Camblock with exhaust marking for vauxhall Z20NET engine (2. 3 4880180 KM-6077 83 96 392 Tension pin 1.0
4 4880230 KM-J-38122-A 83 96 210 Holding tool (KM-J-38122-A)
OPEL
829088 - CAMSHAFT HOLDING TOOL FIAT/FORD/OPEL DIESEL JTD - 1.3
The 829088 camshaft pulley holding tool has been designed to allow the user to loosen and tighten the camshaft pulley fixings without moving the camshafts or causing damage to any timing tools that may be fitted. Conveniently designed to allow the use of a ½ drive wrench the 829088 combines the double headed OEM tool into one single tool.
PETROL
DIESEL
BELT
COMPONENTS
REF
ART. NO.
OEM
DESCRIPTION
1
829088 1 871 008 600 303-1475 Camshaft holding tool Fiat/Ford/Opel diesel JTD - 1,3
OPEL
829091 - CRANKSHAFT HOLDING TOOL OPEL 2.0, 2.2
The 829091 is designed to hold the front crankshaft pulley while tightening or loosening the pulley fixings on the GM/Opel/Saab 2,0lt and 2,2 lt petrol engines.
PETROL
CHAIN PETROL
DIESEL
BELT
DIESEL
COMPONENTS
REF
ART. NO.
OEM
DESCRIPTION
1
4880230 KM-J-38122-A
Holding tool (KM-J-38122-A)
| S O N I C - E Q U I P M E N T. C OM 284
Made with FlippingBook - Online catalogs