Sonic Catalog 2020/21

47029 - HEAT INDUCTOR GUN

E Tool Safety

2 Components

1. Power unit 2. Serial number 3. Storage case (not shown) 4. Model number 5. Cord and plug 230v AC 6. Vent (end) 7. Preformed coil - 19mm 8. Preformed coil - 22mm 9. Universal rope coil 10. Body-pad (option) 11. Owners manual (not shown) 12. Power switch 13. Coil location socket 14. Thumb screw 15. LED

Do not use the Heat Inductor without an attachment fitted. Ensure attachment is securely located and thumb screws are firmly tightened.

1. Power unit 2. Serial Number 3. Storage case (not shown) 4. Model number 5. Cord and Plug 230v AC 6. Vent (end) 7. Preformed Coil - 19mm 8. Preformed Coil - 22mm 9. Universal rope coil 10. Body-Pad (option) 11. Owners Manual (not shown) 12. Power Switch 13. Coil Location Socket 14. Thumb Screw 15. LED

Do not use the Heat Inductor for longer than the stated duty cycle: THREE minutes on followed by THREE minutes off.

• The main circuit board has an overheat protection device, however the attachments do not have overheat protection so should not be used for more than THREE minutes of continued use. • Please ensure that the cooling fan is running when the power switch is operated, if the fan does not run DO NOT use the Heat Inductor and contact Sonic.

CAUTION

10

9

8

7

Do not attempt to create more than 4 coils using a “YOU-FORM” or rope coil, a minimum of 2 coils and a maximum 3 to 4 coils is the optimum number needed for best operation.

10

9

8

7

The Heat Inductor should not be left unattended whilst switched on. • In order to cool effectively, and prolong the life of your Heat Inductor, always ensure that there is a sufficient supply of clean air, make sure that the vents of the Heat Inductor are clean and free of dust and debris so that the Power Unit has an unimpeded flow of cooling air. • Do not attempt to repair or service the Heat Inductor. There are no User-serviceable parts besides replacing the coil attachments.

Please contact Sonic at service@sonic-equipment.com for repair or service.

13

2 4

13

6

13 15

2 4

6

6

13 15 14

6

1

14

12

1

12

6. The key benefit of this is that it minimises the risk of collateral damage and reduces ‘cool off’ periods saving the workshop time and money. It is an invaluable tool for working with easily damaged components such as body trim and windscreen surrounds. The magnetic field passes through non-metals such as glass and trim and heats the metal underneath. Ideal for track rod ends, exhausts and for any seized nuts and bolts. Supplied with one of each 22mm coil, 19mm coil, universal rope coil. Heat Inductor Gun The heat inductor uses induction technology to create flameless heat. This accurately concentrates the heat into the area you are working on, only heating the metal or treated plastics.

07

5

5

7.

Features - 240v 13amp mains powered hand held heat inductor - Uses induction technology to generate heat quickly in ferrous (iron) components - No flame or flammable liquids or gases used - Heat quickly to small or medium size area (coil dependent) - Supplied with a selection of coil sizes and shapes - Is faster, smaller and more precise than an oxy-acetylene torch system - Can heat a 3/4” nut in less than 15 seconds - Reduces ‘cool down’ periods giving a valuable time saving for busy workshops - Potentially gives cheaper liability insurance due to less risk than use of open flames - Is cheaper to run than gas torch systems - Has different coil types to help it reach virtually any difficult to reach area - Has no need for specialist training - Has an ergonomically designed ‘pistol grip’ handle for ease of use - Has a bright LED lamp to illuminate the work area

ART. NO.

CONTENTS

47029-1

Standard coil 15mm for heat inductor

47029-2

Standard coil 19mm for heat inductor

47029-3

Standard coil 22mm for heat inductor

47029-4

Standard coil 26mm for heat inductor

47029-5

Standard coil 32mm for heat inductor

47029-6

Standard coil 38mm for heat inductor

47029-7

Standard coil 45mm for heat inductor

47029-8

Extra long coil 15mm for heat inductor

The heat inductor gun can be used to: - The removal of seized and corroded components - Nuts and bolts - Track rod ends - Exhaust clamps - Manifold nuts/bolts - Bearing housings - Steering and suspension - Bearings, gears and pulleys and many more

47029-9

Extra long coil 19mm for heat inductor

47029-10

Extra long coil 22mm for heat inductor

47029-11

Extra long coil 26mm for heat inductor

47029-12

Extra long coil 32mm for heat inductor

47029-13

Extra long coil 38mm for heat inductor

Repairs - Freeing off wheel nuts without the risk of extensive wheel damage (where acces permits) - Hail dent removal - Body trims - Windscreen surrounds - Generally anything that would traditionally require use of a blowtorch or similar flame producing tool

47029-14

Self forming coil for heat inductor

47029-15

Rope coil for heat inductor

47029-16

Extrallong coil 45mm for heat inductor

4411001 - RIVETING NUT PLIERS

4411002 - RIVETING NUT PLIERS

4411003 - RIVETING NUT PLIERS

- Capacity: M6 steel; M5 stainless steel - Supplied with 3 steel nuts M4 - M5 - M6 - Very comfortable pliers can be used with both hands

- Capacity: Diameter 6.4 mm alu rivets; Diameter 6 mm steel rivets - Absorbers cushion impact when pin snaps - Supplied with 4 nosepieces diameter 4 - 5 - 6 - 6.4 mm and spent-nail holder

New nose with insert for extended durability - Return spring - Supplied with 3 nosepieces and locking key - Capacity: Ø 5 mm aluminium - Ø 4 mm steel

S O N I C - E Q U I P M E N T. C OM | 223