Art. no 48151 Booster 12V/24V 1600/800CA - AGM batteries with high capacity (2) - Starting current: 1600/800CA - Cables: pure copper, double insulation 135cm/35mm² - Battery charger: automatic 12V 4A - Analog voltmeter - 12V DC socket (output only) - Anderson connectors for voltage selection (12/24V) - Reverse polarity alarm - 300A fuse against short circuit - Heavy 45° curved clamps with LED light in blue clamp - Rotational molded plastic housing (unbreakable) - Weight: 20,5kg - Dimensions: 530 x 160 x 480mm
Art. no 48150 Booster 12V/800CA
Art. no 48132 Booster portable mini 12V/440CA - Voltage 12V - Cranking Amps: 440CA - Peak amps 1600A - Cable length 60cm - Cable size 25mm² - Adaptor AC/DC 1.3A - Fuse on battery 300A - Weight 6,5kg - Dimensions: 360 x 130 x 240mm
- High rate AGM battery - Cranking Amps: 800CA - Cables: pure copper, double insulation 155cm/25mm² - Battery charger: automatic 12V 1.3A - Analog voltmeter - 12V DC socket (input & output) - 300A short circuit protection fuse - Heavy duty clamps - Rotomolded plastic housing unbreakable - Weight: 9,5kg - Dimensions: 375 x 110 x 320mm
- Cables: pure copper, 50cm/10mm² - Battery charger: automatic 12V 1.3A - Digital display with LED indicators - Full protection against reverse polarity, short corcuits, overvoltage, overcharge, overtemperature, overdischarge - Equipped with a memory saver function - Heavy duty clamps - Weight: 2,5kg - Dimensions: 260 x 135 x 72mm
Art. no 48148 Hybrid booster 12V-1300A
This booster does no longer have a battery any more and fully operates on a condensator. For boosting the vehicle, the condensator needs to be charged by the empty battery of the vehicle for approximately 2 minutes. The minimum battery voltage for charging is 8 Volt. For starting the vehicle, a peak current of 1300 ampère will be reached. Charging the condensator can also be done by the cigarette lighter socket or the Li-ion battery in the booster, which will take approximately 4 to 6 minutes. This cycle must be repeated after every start attempt. The great advantage of this hybride booster is that the lifetime does no longer depend on the lifetime of the internal battery. Next to this, this booster is considerably lighter than the conventional start boosters and no longer needs a loading unit. The cable length is 130cm with a diameter of 25mm 2 . The weight of the booster is 4.3kg.
- Voltage 12V - Cranking Amps: 1300CA - Peaks 2200A - Extra long cable with a length of 130cm - Radaflex cable Ø 25mm² - Strong, big and curved clamps - Weight 4.3kg
Propulstation ® When it’s stored, it’s charged!
Art. no 48116 AC 12V 800CA Propulstation ® + charging station - Voltage: 12V - Cranking Amps: 800CA