Catalog 2024/2025
OPEL
829062 - ENGINE TIMING KIT OPEL, RENAULT, SAAB DIESEL DOHC CDTI - 1.9
The 829062 provides the essential tools required to replace the camshaft drive belt and remove the camshafts on the Vauxhall/Opel CDTi 1.9/2.0lt twin cam diesel engines listed below.
COMPONENTS
PETROL
BELT PETROL
DIESEL
CHAIN DIESEL
BELT
REF #
OEM
DESCRIPTION
1
4880137 EN-46788
Stud assy
2 4880185 KM-6130, 6349
Auxilliary drive belt tensioner locking pin (4 x 55)
3 4880187 EN-46788/1, 32 025 009 Crankshaft alignment tool
4 4880188 EN-46789, 32 025 008 Camshaft alignment tool
5 4880189 EN-46789-100
Camshaft setting pin assy.
6 4880332 SSM8x20B
M8 x 20 H.T. setscrew
OPEL
829063 - ENGINE TIMING KIT OPEL/FIAT/FORD/PSA DIESEL JTD/HDI - 1.3
This is an essential engine timing tool set that provides the camshaft and crankshaft timing tools only.
COMPONENTS
PETROL
BELT PETROL
DIESEL
CHAIN DIESEL
BELT
REF #
OEM
DESCRIPTION
1
4880183 104-A, EN 46781
Camshaft alignment tool assy
2 4880186 -
Crankshaft pin assy
3 4880096 EN-46785
Locking pin (8mm dia. 70 long)
OPEL
829064 - ENGINE TIMING KIT OPEL/CHEVROLET/SAAB PETROL (A20/A24) - 2.0, 2.4
DevEloped specifically for the high power output 2.0 litre and 2.4 litre twin cam turbo charged petrol engines found across the GM, Chevrolet and Saab ranges. This kit provides all the components required to set and hold the camshafts, crankshaft and chain tensioner components when performing major engine work or replacing the cam chain and associated components.
PETROL
PETROL BELT
DIESEL
DIESEL CHAIN
BELT
COMPONENTS
04
REF #
OEM
DESCRIPTION
1
4880231
EN-49212, EN-49212-1
Vauxhall - Opel - camshaft locking tool LHS (OEM ref: EN-492) Vauxhall - Opel - camshaft locking tool RHS (OEM ref: EN-492)
2 4880232 EN-49212, EN-49212-2
3 4880317 EN-48953
Camshaft adjuster holding tool
4 4880318 EN-48585
Crankshaft bolt hole balancer
5 4880320 J45027-2, EN45027-2, EN-45027,
Tension plunger holder
6 4880321
EN-45027-1, J-45027-1
Tension plunger remover
7 4880319 EN-43653, J43653
Flywheel holding tool bottom half
8 4880135 EN-43653, J43653
Flywheel holding tool
9 4880214 -
M6 x 50 caphead screw
10 4880010 -
Washers M6 form C Zc.Pl.
11 4880173 EN-955-20, KM 955-20 Tensioner location pin 4mm
12 4880172 EN-955-10, KM955
Tensioner location pin 2.5mm
13 4880215 -
M6 x 16 cap head screw self-colour to BS4168
OPEL
829065 - CAMSHAFT ALIGNEMENT KIT OPEL/SAAB PETROL TURBO (Z20/B20) - 2.0
The 829065 kit has been developed to change the camshaft drive chain on the twin cam chain driven 2.0lt turbo petrol engines found in the Vauxhall and Saab ranges from 2002 to 2012. 829065 is an 4 piece kit consisting of the components required to lock the camshaft, hold the crankshaft and set the chain tensioner when replacing the timing chain.
PETROL
PETROL BELT
DIESEL
DIESEL CHAIN
BELT
COMPONENTS
REF #
OEM
DESCRIPTION
1 4880298 KM-6362-1 EN-48366-001 Camblock with inlet marking for vauxhall Z20NET engine (2.0L 2 4880299 KM-6362-2 EN-48366-002 Camblock with exhaust marking for vauxhall Z20NET engine (2. 3 4880180 KM-6077 83 96 392 Tension pin 1.0
4 4880230 KM-J-38122-A 83 96 210 Holding tool (KM-J-38122-A)
SONIC-EQUIPMENT.COM
335
Made with FlippingBook Annual report maker