Catalog 2024/2025
Sonic timing tools
FORD
829089 - CAMSHAFT SETTING TOOL VOLVO/FORD
The 829089 is designed to hold the front crankshaft pulley while tightening or loosening the pulley fixings across the Volvo range of engines and the Ford 2.5 petrol engine found in the ST Focus etc.
COMPONENTS
PETROL
DIESEL
REF
#
OEM
DESCRIPTION
1
829089 999 5433, 303-1179
Crankshaft holding tool Volvo/Ford
FORD
829094 - TIMING CHAIN TENSIONER LEVER FORD PETROL, DIESEL
The 829094 flywheel locking kit is equivalent to the Ford OEM flywheel locking kit as detailed below. It is used to lock the flywheel to allow front pulleys etc. to be loosened and tightened without turning the engine. N.B: Starter motor must first be removed.
DIESEL
PETROL
PETROL BELT
DIESEL
DIESEL CHAIN
BELT
COMPONENTS
REF #
OEM
DESCRIPTION
1
4880061
21-168 A, 303-393A
Flywheel locking tool-Ford
2 4880062 303-393-02
Tooth block item 2
3 4880063 303-393-01
Short tooth block
FORD
829095 - HIGH PRESSURE FUEL PUMP PULLER DIESEL FORD - TDCI - TRANSIT 2.2
As of 2011 Ford changed the method of fuel pump sprocket removal on the 2.2 TDCI (Puma) diesel engines. The sprocket no longer has threaded holes which means the legs of the puller used to remove the sprocket must be hooked in shape. The K00286 puller allows the removal of these sprockets by allowing the high pressure diesel injection pump to be pushed out of the pump sprocket to enable pump removal without disturbing the timing chain. Special note: To perform this task the 829095 must be used with Ford special tool 303-1151 (sprocket holding tool). Note: The 829095 kit contains a force screw. Force screws must be lubricated with high pressure grease. Sonic recommends the use of molybdenum disulphide grease (drive shaft grease). Do not use assembly or anti-seize greases (copper greases). Equivalent to OEM 303-249, 303-249-01
PETROL
PETROL DIESEL
DIESEL B LT
BELT CHAIN
CHAIN
COMPONENTS
REF #
OEM
DESCRIPTION
1
4880240 303-249-01
Fuel pump remover leg assembly
04
2 4880241
303-249-01
Center location plug for diesel pump remover
3 4880013 303-249
Puller beam
4 4880014 303-249-01
Puller centre screw
5 4880219 303-249
M8 x 50 cap head
6 4880047 999 5382
Washer M8 zinc plated
FORD
829106 - CAM BELT TENSIONER WRENCH VAG ADJUSTABLE HEAD
The 829106 is an adjustable cam-belt tensioner tool. Equivalent to EOM T10020 and Matra V159.
PETROL
DIESEL
COMPONENTS
REF
#
OEM
DESCRIPTION
1
829100 T10020//Matra V159 Cam belt tensioner wrench vag adjustable head
A NOTE : the use of this kit requires the acquisition of additional tools.
829107 - OIL PUMP ALIGNMENT PLATE FORD, JAGUAR, LAND ROVER, ROVER, PSA DURATORQ DIESEL 2.0, 2.2, 2.4, 3.2 The 829107 oil pump alignment tool has been developed to allow the user to correctly align the engine oil pump in the sump after an engine rebuild etc. it is important that the pump be correctly and accurately aligned to ensure the oil pump sprocket is not operating with excessive side loads.
FORD
PETROL
PETROL DIESEL
DIESEL B LT
BELT CHAIN
CHAIN
COMPONENTS
REF
#
OEM
DESCRIPTION
A
829107 303-705, 303-1093, 0198.H
Oil pump alignment plate Ford/Jaguar Land Rover/PSA diesel
A
NOTE : the use of this kit requires the acquisition of additional tools.
SONIC-EQUIPMENT.COM 326
Made with FlippingBook Annual report maker